J-Pyott Material Spreaders

This material spreader comes in two models. The small version adjusts from a minimum of 4’ wide up to a maximum of 6’ wide. The large version adjusts from a minimum of 6’ wide to a maximum of 10’ wide.

The Severe Duty material spreader can adjust from 0 inches minimum material thickness to be spread up to 8 inches maximum material thickness. Each side of the machine can be adjusted individually to create a slope to the material being spread. The spreader acts as a scraper if adjusted to 0 inches. The material spreader has very wide skids that are offset to the center of the spreader so that the machine will not sink into soft ground, and so that side by side pulls of material can be spread, such as when used to pave a parking lot.

All Steel Construction. This spreader is made of 1/4” Thick A-572 steel with ½” thick A-572 steel used for the lift and mounting brackets. The skids and the screed have the option of being made of AR-400 grade industrial wear plate for the ultimate in strength and wear resistance. All severe duty material spreaders are fully seam welded by professional fabricators using parts fabricated on modern equipment such as Trumpf Plasma/Punch machines and the Hypertherm HPR260 fine cut plasma. This material spreader is designed around a strong “central box” design that provides increased strength and allows the attachment of many custom accessories.

Durable Finish. A durable Black Powdercoat Paint finish is applied and baked on all of the Material Spreaders. This finish is chemical resistant to protect against repeated cleaning over years of use, scratch resistant to resist gravel and asphalt, and so beautiful you may not want to put it to work.

Long Life Components. The spreader uses mechanical jacks that are rated at 2000 Lbs capacity each that are designed to be removed for replacement or cleaning if necessary. All fasteners are plated Grade 8 or better. The skids that touch the ground bolt on for easy replacement since they will eventually wear out after years of use. Heavy duty pins have been used instead of bolts wherever possible so that tools are not needed during normal operation.

Custom Hitch. The Severe Duty Material Spreader has the option of using a custom designed mounting system. This custom hitch is designed specifically to fit each customer’s truck. The hitch design uses the trucks axle or spring shackles to pull the material spreader. This design provides a much better quality surface finish when the material spreader is used with asphalt.